Approx. Rs 6.5 Lakh / PieceGet Latest Price
Product Details:Bed Length | 20 Feet |
Height of Centre | 600 mm |
Swing Over Bed | 1200 mm |
Spindle Bore | 105 mm |
Applicable Industry | Textile, Sugar Mills, Shipbuilding, Oil Industry, Power Plant, Steel Rolling Mills, Paper Mills |
Bed Width | 600 mm |
Number of Spindle Speeds | 8 |
Distance Between Centre | 2100 mm |
Swing Over Cross Slide | 800 mm |
Maximum Swing in Gap | 1300 mm |
Lead Screw Diameter | 55 mm |
Motor Power | 5 HP |
Machine Weight | 3500 kg |
Esskay Lathe Group of Comanies Manufacturers of All types and All Sizes of Extra Heavy duty lathe machines since 1978 and supplied all our machines worldwide.
Functions:
HEAD STOCK:
Head Stock is situated at the left side on the all types of horizontal lathe machines and it is the main part of the running mechanism and electrical mechanism of a Lathe machine.
BED:
It is the base of the lathe machine. It is made of the single-piece casting of Cast Iron. The bed consists of two heavy metal slides running lengthwise, with ways or ‘V’ formed upon them and rigidly supported with cross girths.
TAILSTOCK:
Tail Stock is situated on the right side above the lathe bed.
It is used for:
CARRIAGE:
SADDLE:
Generally, it is made up of ‘H’ shaped casting and it has a ‘V’ guide and a flat guide for mounting it on the lathe bed guide ways.
CROSS SLIDE:
It is assembled on the top of the saddle. The top surface of the cross-slide is provided with T-slot
COUMPOUND REST:
It supports the tool post and cutting tool in its various positions. It can be swiveled at any desired position in the horizontal plane. It is necessary for turning angles and boring short tapers.
TOOL POST:
It is the topmost portion of the carriage and it is used to hold various cutting tools or tool holders.
APRON:
An apron is a house of the feed mechanism. It is fastened to the saddle and hangover in front of the bed.
LEAD SCREW:
A lead screw is also known as a power screw or a translation screw. It converts rotational motion to linear motion. Lead Screw is used for Thread Cutting operation in a lathe machine tool.
FEED ROD:
Feed rod is used to move the carriage from the left side to the right side and also from the right side to the left side
CHUCK:
Chuck is used to holding the work piece securely.
Features:
Standard Accessories:
Steady Rest , Follow rest , Dead center, change gears, Safety cover.
Explore More Products
© Ess Kay Lathe Co.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited